Advantages Fuel Testing And Polishing Services.
Fuel can get contaminated when it is stored for a long time. Fuel contamination is commonly referred to as fuel bugs of diesel bugs. Fuel often develops sludge and sediment which is brought about by microbial contamination. diesel bugs can be identified by blocked filters, worm fuel injectors, engine failures and corroded tanks. Fuel should be regularly tested for contaminants and polished so that it can continue working effectively.
Getting rid of contaminants in fuel is what is referred to as fuel polishing. Polishing is an advanced method of filtering the fuel. The fuel is taken through various stages during polishing which each stage removing a denser contaminant than the previous one to get clean fuel at the end of the process. The polishing process takes a different amount of time to finish such as the cleaning machine used and the volume of fuel to be polished.
Polishing is a sure way of ensuring you keep your machines in good working conditions. Polishing oil is often costly but the implications of using contaminated fuel will cost you greatly. If care is not taken, you will end up with damaged machine components due to the fuel contamination and this is often costly to repair. It is also a hazard if for instance there is engine failure in an airplane because of using contaminated fuel and this may cause accidents.
Fuel polishing is a great way of ensuring that companies with large reservoirs of fuel do not have to replace their old fuel each time. You can ensure that polished fuel is free of contaminants by testing it before use. polished fuel offers more fuel performance than contaminated fuel. The level of corrosion and carbon buildup are reduced when using polished fuel.
There are various factors one needs to look at when choosing a fuel polishing service. the first thing most companies look at is the cost. Most companies look for ways of cutting down on the cost of polishing oil as this is often an expensive exercise. Fuel flow being uninterrupted during fuel polishing is another thing most companies ask for. While this can be ensured if the company has more than one storage tank, it is at times challenging when a company has one tank. When polishing is taking place. most companies do not want the entire exercise to take up a lot of time.
In an effort to cut down on time used to polish fuel, machines have been built that speed up this process. Machines have been made that are able to polish large volumes of fuel at a time. Time spent on polishing fuel is saved when using machines like these.